Skip to main content

Titanium Turnings and Briquettes

AmeriTi Turnings

Titanium Turnings

AmeriTi Manufacturing purchases turnings generated from machining operations. These turnings are crushed, cleaned to remove dirt and oil, dried, and sized to meet customer specifications.

AmeriTi Manufacturing can supply any titanium alloy turnings and with over 1,000 MT of monthly capacity and an on-site laboratory, customers can be assured that AmeriTi has the production capacity to meet their needs and the quality controls in place to produce a consistent product.

Titanium Briquettes

AmeriTi Manufacturing produces a single, standard-size briquette that measures 3 1/2″ in diameter by approximately 2″ in thickness. However, there are several options in regards to chemistry and raw materials that compose the briquette. Below are descriptions of these different products.

CP Sponge Briquette

The CP sponge briquette is produced from titanium sponge fines.

CP Turnings Briquette

The CP turnings briquette is produced from CP titanium turnings. The fines are produced from crushing and washing CP titanium turnings and are smaller than 10 mesh in size.

Ferro Turnings Briquette

The ferro turnings briquette is produced from ferro-grade titanium turnings. The fines are produced from crushing and washing ferro-grade titanium turnings and are smaller than 10 mesh in size.

Crafted by Element5 Digital